Verifikasi metode Uji Penentuan Kelemasan Kulit Tersamak Menggunakan Softness Tester

Authors

  • Eko Nuraini Politeknik Akademi Teknologi Kulit

Abstract

Softness tester test method is used to test the softness of tanned leather samples, especially for leather that requires a certain flexibility. There needs to be standardization or verification of test methods as re-confirmation in ensuring the test method used. There is verification so that the data produced is accurate and can maintain quality control of the results of the tests. Tanned leather turns limp due to the addition of chemicals. So far, the method of testing for weakness in the physical testing laboratory has never been verified. This study aims to verify the skin elasticity analysis method, it is hoped that the results of the verification can later be used for routine testing. The skin sample used was goat skin for the jacket material. The test was determined using a Softness tester. Parameters of the analysis method used precision, accuracy and testing uncertainty. The results obtained were SD 0.099;%RSD 1.53, a precision value of ≤ 2% can be stated as good precision; accuracy value 99.37%≥95% accuracy value meets the requirements; bias value 0.629. The results of the uncertainty calibration softness 0.0085; accuracy uncertainty 0.057; the combined uncertainty value is 0.058 and the expanded uncertainty value is 0.116. The softness value of the goat skin sample for jacket material was 6.49 ± 0.116, fulfilling the standard quality requirements for jacket material according to SNI 4503:2011. The conclusion obtained by the analyst is that they are able to perform skin flexibility tests according to the SNI ISO 17235:2012 method and this method can be used in the ATK Polytechnic Physical Testing Laboratory.

Downloads

Download data is not yet available.

References

Badan Standarisasi Nasional (2011)a SNI-4593-2011.Kulit Jaket Domba/Kambing. BSN. Jakarta

(2011)b SNI- 4593-2011.Kulit jaket domba/kambing. BSN.Jakarta.

(2015) SNI ISO 2419:2015. Kulit-Metode Uji Fisis dan Mekanis-Penentuan Kelemasan. Jakarta: Badan standar Nasional.

(1996) SNI 06-0777-1996 Kulit Sarung Tangan Golf Samak Krom dari Domba atau Kambing. Jakarta: BSN.

Ganjar, R. d. (2007). Kimia Farmasi Analisis. Yogyakarta: Pustaka Belajar.

Harmita. (2004). Petunjuk pelaksnaan validasi metode dan cara perhitungannya. majalah ilmu kefarmasian , Vol I hal 119-122.

https://www.msa-engineering.co.uk/products/st300-softness-tester. (2020). Pengujian Kulit Peralatan Kontrol kualitas Pengujian dan Pengukuran area untuk stok kulit mentah dan kulit jadi . -: MSA Engineering System .

https://www.sltc.org/sltc-publications/method-of-analysis.html. (2023). The IULTCS official methods of Analysis for lether. -: SLTC (sOCIETY OF LEATHER TECHNOLOGISTS AND CHEMICALS .

KAZANAVIČIUS∗, K. (2008). Evaluation of Leather Softness. MATERIALS SCIENCE (MEDŽIAGOTYRA). Vol. 14, No. 2, 179-182.

Nuraini, E. (2020). SOFTNESS TEST ST 300 SEBAGAI ALAT UJI KELEMASAN KULIT TERSAMAK PADA LABORATORIUM PENGUJIAN FISIS POLITEKNIK ATK. Majalah Kulit Politeknik ATK Yogyakarta, Vol. 19, Edisi 1 , 64-70 .

Nuraini, P. H. (2022). Perhitungan Nilai Ketidakpastian (Uncertainty) pada Uji tebal kulit menggunakan alat ukur Thickness. berkala penelitian kulit, sepatu dan produk kult.Politeknik ATK Yogyakarta, 290-296.

Purnomo, E. (2002). Penyamakan Kuit Ikan Pari. Yogyakarta: Kanisius.

Rahayu, C. (2021). Verifikasi Metode penentuan suhu,pH dan Nitrit pada air bersih di Kantor Pusat pengendalian Pembangunan Ekoregion Jawa. YOGYAKARTA: UII.

Sa'adah, W. d. (2010). Validsai metode Pengujian Logam Tembaga pada Produk Air Minum dalam Kemasan Secara Spektrofotometri Serapan Atom Nyala. Biopropal Industri Vol 1, 31-37.

Additional Files

Published

2023-10-31
Abstract Viewed = 64 times | PDF downloaded = 0 times