PRODUCTIVITY ANALYSIS OF SPLIT STONE PRODUCTION USING OBJECTIVE MATRIX (OMAX) METHOD (A Case Study)
DOI:
https://doi.org/10.14421/jiehis.3498Keywords:
Objective Matrix, Fault Tree Analysis, Split Stone, ProductionAbstract
One of the building materials that has a high business prospect is split stone. Some building material management companies in one of their departments produce split stone, which in its production there are several types of products based on size to meet various consumer demands. In production, especially in the 2021 period, there will be fluctuating or uneven production levels, where in one month there will be high production, and in another period there will be a decrease in production. Based on this, this study aims to analyze the calculation of productivity to identify what factors cause the productivity of split stone production to fluctuate. This research was assisted by using the objective matrix (OMAX) and fault tree analysis (FTA) methods. the results of the productivity recapitulation found that the attendance data component obtained an average score of 2.3 which is the lowest average when compared to other components. therefore with these results, attendance is the strongest factor affecting fluctuating productivity.
References
Andry Andoko Sirait, Rommel, Noveicalistus H.Djanggu, dan Dedi Wijayanto. 2017. Pengukuran dan Evaluasi
Produktivitas Lini Produksi Menggunakan Metode Objective Matrix dan Fault Tree Analysis. Fakultas
Teknik Universitas Tanjungpura: Pontianak.
Haslindah, Andi, Andrie, Abdul Rahmad Wahyudi, Muhammad Taslim Zakaria. 2021. Analisis Dampak
Produktivitas di Masa New Normal Pada Kawasan Industri Makassar Dengan Metode Omax. Jurnal Teknik
Industri, 16(01).,1-5.
Agustina, Fitri, dan Nina Aris Riana. 2016. Analisis Produktivitas dengan Metode Objective Matrix (OMAX) di PT.
X. Jurnal Teknik dan Manajemen Industri, 6(2), 150-158.
Mukti, Ajeng Risky, Qurotul A’yun, Suparto. 2021. Analisis Produktivitas Menggunakan Metode Objective
Matrix (OMAX) (Studi Kasus: Departemen Produksi PT Elang Jagad). Jurnal Teknologi dan Manajemen,
(1), 13-18.
Mail, Abdul, Takdir Alisyahbana, Anis Saleh, Rahmania Malik, Ibrahim. 2018. Analisis Produktivitas Dengan
Metode Objektive Matrix (Omax) Pada Cv. Bintang Jaya. Journal of Industrial Engineering Management,
(2), 93-100.
Yosan, R Bagus, Kholil Muhammad, Winny Soraya. 2016. Increasing Productivity With Objective Matrix Method
Case Study On Building Maintenance Management Pio Pt. Xxx. International Seminar on Industrial
Engineering and Management.
Irwansyah, Defi, Cut Ita Erliana, Fadlisyah, Mutamminul Ula, Mahlil Fahrozi. 2022. Increasing Productivity In
CPO Production Using The Objective Matrix (OMAX) Method. International Journal of Engineering,
Science & InformationTechnology, 2(2), 14-20.
Indriani, Andi Marini, Agus Sugianto, Faisal. 2017. Analisis Penggunaan Batu Split Long Ikis Terhadap
Karakteristik Campuran AC-WC (Asphal Choncrete- Wearing Course). Jurnal Teknologi Terpadu, 2(3), 87-92.
Boryczko, K.; Szpak, D.; Żywiec, J.; Tchórzewska-Cieślak, B. The Use of a Fault Tree Analysis (FTA) in the
Operator Reliability Assessment of the Critical Infrastructure on the Example of Water Supply
System. Energies 2022, 15, 4416. https://doi.org/10.3390/en15124416
Atul Palange, Pankaj Dhatrak, Lean manufacturing a vital tool to enhance productivity in manufacturing, Materials
Today: Proceedings, Volume 46, Part 1, 2021, Pages 729-736, ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2020.12.193.
F. Tania, and M. Ulkhaq, "PENGUKURAN DAN ANALISIS PRODUKTIVITAS DI PT. TIGA MANUNGGAL
SYNTHETIC INDUSTRIES DENGAN MENGGUNAKAN METODE OBJECTIVE MATRIX (OMAX)," Industrial Engineering Online Journal, vol. 5, no. 4, Nov. 2016.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Indro Prakoso
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
(c) The Author(s). This article is distributed under a Creative Commons Attribution-ShareAlike 4.0 International License.
