Identification of Causes in The Dirty Gas Pipeline in Oil and Gas Delivery Process at Job Pertamina Talisman Jambi Merang
DOI:
https://doi.org/10.14421/jiehis.3770Keywords:
pigging; dirty; gas pipe; pipingAbstract
Pigging is a routine maintenance method for cleaning the inner pipe surface. The treatment method uses an object called pig. In the world of piping, there are 4 (four) components that are very important and interrelated in carrying out pigging, namely pig launchers, piping systems, pig receivers, and pigs. Pig Launcher is a tool that is used to fire pigs into piping systems, while pigs are objects that are used according to their functions on surfaces in piping systems. The purpose of this study was to identify the cause of dirty gas pipelines in the oil and gas delivery process at JOB Pertamina Talisman Jambi Merang. From the results of the analysis and discussion, identified causes of dirty gas pipes, namely non-standard work procedures, no commitment to pigging activities from the management, non-standard equipment, use of non-standard and outdated anti-corrosion, lack of training on pigging, and low employee awareness of the importance of pigging.
References
Ahmadi, N., & Hidayah, N. Y. (2017). Analisis pemeliharaan mesin blowmould dengan metode RCM di PT. CCAI. Jurnal Optimasi Sistem Industri, 16(2), 167-176. https://doi.org/10.25077/josi.v16.n2.p167-176.2017
Akbar, M. R., & Widiasih, W. (2022). Analisis perawatan mesin bubut dengan metode preventive maintenance guna menghindari kerusakan secara mendadak dan untuk menghitung biaya perawatan. Jurnal SENOPATI, 1(2), 32-45. http://dx.doi.org/10.31284/j.senopati.2022.v4i1.3086
ASME B31.4. (2010). Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids. New York: The American Society of Mechanical Engineers.
ASME B31.8. (2014). Gas Transmission and Distribution Piping Systems. New York: The American Society of Mechanical Engineers.
Basuki, M. (2017). Penentuan rute optimum distribusi produk PT Indmira berdasarkan jarak. Jurnal Desiminasi Teknologi, 5(1), 1-7. http://dx.doi.org/10.52333%2Fdestek.v5i1.359
Basuki, M. (2019). Identifikasi caccat prioritas pada proses shaving untuk pengendalian mutu kualitas. Jurnal Rekayasa Sistem dan Industri, 6(2), 101-108. https://doi.org/10.25124/jrsi.v6i02.378
Basuki, M., & Fahadha, R.U. (2020). Identification of the causes nata de coco production defects for quality control. SPEKTRUM INDUSTRI, 18(2), 175-181. http://dx.doi.org/10.12928/si.v18i2.14393
Carito, D. (2008). Pigging. Blora: Pusdiklat Migas Cepu.
Cordell, Jim & Vanzant, H. (1996). All About Pigging: The Design of Pipelines and Facilities for Conventional and Intelligent Pigging and A Guide to Pig Selection, Operation and Maintenance and to Pipeline Pigging Services. Cirencester: Stream System Ltd.
Mandraguna, F. Y., & Afiff, J. M. (2018). Perancangan pig launcher untuk pipa gas. Seminar Nasional Cendekiawan ke 4.
Marimin & Zulna, N. F. (2022). Interval analisys of critical component of fuel conveyor unit using reliability centered maintenance (RCM) approach. Jurnal Teknologi Industri Pertanian, 32(1), 12-20. https://doi.org/10.24961/j.tek.ind.pert.2022.32.1.12
Mujiraharjo, F, N., & Basuki, M. (2019). Analisis indeks kepuasaan masyarakat terhadap pelayanan publik bidang kesehatan (studi kasus: Faskes tingkat I Mojokerto). Jurnal Desiminasi Teknologi, 7(2), 93-98. http://dx.doi.org/10.52333%2Fdestek.v7i2.497
Nguyen T.T., Kim S.B., Yoo H.R., & Rho Y.W. (2001). Modeling and simulation for pig with bypass flow control in natural gas pipeline,,KSME International Journal, 15(9), 1302-1310. http://dx.doi.org/10.1007/BF03185671
Nurcahyo, N. (2011). Rancang Bangun Simulator Fisik Fasilitas Pigging serta Pemodelan dan Pengujian Karakteristik Foam Pig. Master Tesis. Semarang: Program Studi Magister Teknik Kimia, Fakutas Teknik, Universitas Diponegoro.
Pristianto, H. (2010). Flushing system sebagai system pembersihan pipa fluidisasi pada teknologi pemeliharaan alur muara sungai. Jurnal “MEDIAN”, 2(2), 1-7.
Setyarini, F., & Natalisanto, A. I. (2016). Analisis kaitan koefisien gesek dan peluang pembersihan pipa dengan foam pig. Prosiding Seminar Sains dan Teknologi FMIPA Unmul, 1(1), 18-23.
Tiratsoo, J. R. H. (1992). Pipeline Pigging Technology (2nd ed). Texas: Gulf Professional Publishing,Houston.
Wikipedia (2022). Pigging. https://en.wikipedia.org/wiki/Pigging. Accessed on November 16, 2022.
Witanti, W., Harihayati, M. T., & Peraiyantika, A. (2022). Analisis dan perancangan sistem penentuan prioritas penanganan kerusakan pipa air minum perusahaan XYZ dengan metode TOPSIS, Journal of Information Technology, 4(1), 8-13. https://doi.org/10.47292/joint.v4i1.72
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Mahmud Basuki
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
(c) The Author(s). This article is distributed under a Creative Commons Attribution-ShareAlike 4.0 International License.
