HALAL PRODUCT REVIEW BASED ON TOTAL QUALITY MANAGEMENT AND A SUPPLY CHAIN MANAGEMENT PERSPECTIVE
DOI:
https://doi.org/10.14421/jiehis.1877Abstract
Halal products are produced through toyyib processes so that they can be used and consumed by consumers, especially Muslims. Toyyib,which isa prerequisite for halal products, is translated asaform of guarantee of the procurement process, material handling, products, and transportation in accordance with Islamic law. The collaboration betweenproducers andsuppliers, distributors, and consumers is the key to implementing supply chain management (SCM) of halal products. Then, the participation of all business actors in the supply chain network to engage in continuous improvement is an articulation of the implementation of total quality management (TQM). The previous literature shows that research that examines halal products from the perspective of TQM and SCM is still limited. Therefore, this paper investigates halal products from the viewpoint of TQM and SCM. Both perspectives are used with the consideration that the toyyib process is not only the responsibility of the producer, but also the responsibility of the supplier, distributor, and consumer. The combination of TQM and SCM is expected to produce a production process for halal products that conformswith Islamic lawReferences
Ab Talib, M.S., Abdul Hamid, A.B. and Zulfakar, M.H. (2015), “Halal supply chain critical success factors: a literature review”, Journal of Islamic Marketing, Emerald Group Publishing Limited, Vol. 6 No. 1, pp. 44–71.
Ali, M.H. and Suleiman, N. (2018), “Eleven shades of food integrity: A halal supply chain perspective”, Trends in Food Science & Technology, Vol. 71, pp. 216–224.
Ali, M.H., Tan, K.H. and Ismail, D.M. (2017), “A supply chain integrity framework for halal food”, British Food Journal, Emerald Publishing Limited, Vol. 119 No. 1, pp. 20–38.
Ambali, A.R. and Bakar, A.N. (2014), “People’s Awareness on Halal Foods and Products: Potential Issues for Policy-makers”, Procedia - Social and Behavioral Sciences, Vol. 121, pp. 3–25.
Ataseven, C. and Nair, A. (2017), “Assessment of supply chain integration and performance relationships: A meta-analytic investigation of the literature”, International Journal of Production Economics, Vol. 185, pp. 252–265.
Chen, H., Daugherty, P.J. and Roath, A.S. (2009), “Defining and operationalizing supply chain process integration”, Journal of Business Logistics, Wiley-Blackwell, Vol. 30 No. 1, pp. 63–84.
Chiarini, A. (2011), “Japanese total quality control, TQM, Deming’s system of profound knowledge, BPR, Lean and Six Sigma: Comparison and discussion”, International Journal of Lean Six Sigma, Emerald Group Publishing Limited, Vol. 2 No. 4, pp. 332–355.
Chountalas, P.T. and Lagodimos, A.G. (2019), “Paradigms in business process management specifications: a critical overview”, Business Process Management Journal, Emerald Publishing Limited, Vol. 25 No. 5, pp. 1040–1069.
Cooney, R. and Sohal, A. (2004), “Teamwork and Total Quality Management: A Durable Partnership”, Total Quality Management & Business Excellence, Routledge, Vol. 15 No. 8, pp. 1131–1142.
Dimitriades, Z.S. (2000), “Total involvement in quality management”, Team Performance Management: An International Journal, MCB UP Ltd, Vol. 6 No. 7/8, pp. 117–122.
Ehigie, B.O. and McAndrew, E.B. (2005), “Innovation , diffusion and adoption of total quality management ( TQM )”, Management Decision, Vol. 43 No. 6, pp. 925–940.
Fynes, B., Voss, C. and De Búrca, S. (2005), “The impact of supply chain relationship quality on quality performance”, International Journal of Production Economics, Vol. 96 No. 3, pp. 339–354.
González, T.F. and Manuel, G. (2002), “Leadership ethical dimension: a requirement in TQM implementation”, The TQM Magazine, MCB UP Ltd, Vol. 14 No. 3, pp. 150–164.
Gunasekaram, A., Goyal, S., Martikainen, T. and Yli‐Olli, P. (1998), “Total quality management: a new perspective for improving quality and productivity”, International Journal of Quality & Reliability Management, MCB UP Ltd, Vol. 15 No. 8/9, pp. 947–968.
Halldórsson, Á. and Skjøtt-Larsen, T. (2004), “Developing logistics competencies through third party logistics relationships”, International Journal of Operations & Production Management, Vol. 24 No. 2, pp. 192–206.
Handfield, R. and Melnyk, S.A. (1998), “The scientific theory-building process: a primer using the case of TQM”, Journal of Operations Management, Vol. 16 No. 4, pp. 321–339.
Honarpour, A., Jusoh, A. and Long, C.S. (2017), “Knowledge management and total quality management: a reciprocal relationship”, International Journal of Quality & Reliability Management, Emerald Publishing Limited, Vol. 34 No. 1, pp. 91–102.
Huo, B., Liu, C., Chen, H. and Zhao, X. (2017), “Dependence, trust, and 3PL integration: an empirical study in China”, International Journal of Physical Distribution & Logistics Management, Emerald Publishing Limited , Vol. 47 No. 9, pp. 927–948.
Huo, B., Ye, Y., Zhao, X. and Zhu, K. (2019), “Supply chain quality integration: A taxonomy perspective”, International Journal of Production Economics, Vol. 207, pp. 236–246.
Jagdeep, S. and Harwinder, S. (2015), “Continuous improvement philosophy – literature review and directions”, Benchmarking: An International Journal, Emerald Group Publishing Limited, Vol. 22 No. 1, pp. 75–119.
Jungbae Roh, J., Hong, P. and Park, Y. (2008), “Organizational culture and supply chain strategy: a framework for effective information flows”, edited by Hassini, E.Journal of Enterprise Information Management, Emerald Group Publishing Limited, Vol. 21 No. 4, pp. 361–376.
Khan, M.I., Haleem, A. and Khan, S. (2018), “Defining Halal Supply Chain Management”, Supply Chain Forum: An International Journal, Taylor & Francis, Vol. 19 No. 2, pp. 122–131.
Mandeep, K., Kanwarpreet, S. and Doordarshi, S. (2019), “Synergetic success factors of total quality management (TQM) and supply chain management (SCM): A literature review”, International Journal of Quality & Reliability Management, Emerald Publishing Limited, Vol. 36 No. 6, pp. 842–863.
Manzouri, M., Ab Rahman, M.N., Saibani, N. and Rosmawati Che Mohd Zain, C. (2013), “Lean supply chain practices in the Halal food”, International Journal of Lean Six Sigma, Emerald Group Publishing Limited, Vol. 4 No. 4, pp. 389–408.
Marco, T., van der Vorst, J. and Che Ghazali, M. (2012), “Principles in halal supply chain management”, Journal of Islamic Marketing, Emerald Group Publishing Limited, Vol. 3 No. 3, pp. 217–243.
Norasekin, A.R. and Jamil, B. (2019), “The relationship between halal traceability system adoption and environmental factors on halal food supply chain integrity in Malaysia”, Journal of Islamic Marketing, Emerald Publishing Limited, Vol. 11 No. 1, pp. 117–142.
Perdana, Y.R., Ciptono, W.S. and Kusdhianto, S. (2019), “Broad span of supply chain integration: theory development”, International Journal of Retail & Distribution Management, Emerald Publishing Limited, Vol. 47 No. 2, pp. 186–201.
Satish, M. and Sampath, R. (2008), “Implementing total quality management with a focus on enhancing customer satisfaction”, International Journal of Quality & Reliability Management, Emerald Group Publishing Limited, Vol. 25 No. 9, pp. 913–927.
Spiegel, van der M., Fels-Klerx, van der H.J., Sterrenburg, P.,Ruth, van S.M., Scholtens-Toma, I.M.J. and Kok, E.J. (2012), “Halal assurance in food supply chains: Verification of halal certificates using audits and laboratory analysis”, Trends in Food Science & Technology, Vol. 27 No. 2, pp. 109–119.
Stevens, G.C. and Johnson, M. (2016), “Integrating the Supply Chain … 25 years on”, International Journal of Physical Distribution & Logistics Management, Vol. 46 No. 1, pp. 19–42.
Tieman, M. (2011), “The application of Halal in supply chain management: in‐depth interviews”, Journal of Islamic Marketing, Emerald Group Publishing Limited, Vol. 2 No. 2, pp. 186–195.
Tieman, M. and Ghazali, M.C. (2014), “Halal Control Activities and Assurance Activities in Halal Food Logistics”, Procedia - Social and Behavioral Sciences, Vol. 121, pp. 44–57.
Vinod, K.K. and Ruby, G. (2014), “Comparative study of the impact of competency-based training on 5 ‘S’ and TQM: a case study”, International Journal of Quality & Reliability Management, Emerald Group Publishing Limited, Vol. 31 No. 3, pp. 238–260.
Wiengarten, F., Humphreys, P., Gimenez, C. and McIvor, R. (2016), “Risk, risk management practices, and the success of supply chain integration”, International Journal of Production Economics, Vol. 171, pp. 361–370.
Zhang, X., Pieter van Donk, D. and van der Vaart, T. (2011), “Does ICT influence supply chain management and performance? A review of survey‐based research”, International Journal of Operations & Production Management, Emerald Group Publishing Limited, Vol. 31 No. 11, pp. 1215–1247.
Downloads
Additional Files
Published
How to Cite
Issue
Section
License
Copyright (c) 2020 Journal of Industrial Engineering and Halal Industries (JIEHIS)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
(c) The Author(s). This article is distributed under a Creative Commons Attribution-ShareAlike 4.0 International License.
