Pemilihan Lokasi Budidaya Rumput Laut Menggunakan Metode Analytical Hierarchy Process (AHP) dan Simple Additive Weighting (SAW)
DOI:
https://doi.org/10.14421/jiska.2022.7.2.122-133Keywords:
Lokasi Budidaya Rumput Laut, Eucheuma Cottonii, SPK, Metode AHP, Metode SAWAbstract
One of the professions in the marine sector that is mostly occupied by people living in coastal areas is seaweed cultivation. Seaweed is one of the marine product commodities with great potential to be developed in Indonesia because it has high economic value. One of the areas that are included as producers of Eucheuma Cottonii seaweed is Nunukan Island, which is located in Nunukan Regency, North Kalimantan Province. The main factor that determines success in seaweed cultivation activities is the selection of land locations. Errors in site selection can lead to crop failure and low quality of the seaweed produced. The purpose of this study is to create a decision support system to facilitate and assist the community in selecting the best location for seaweed cultivation quickly and precisely according to the criteria using the Analytical Hierarchy Process (AHP) method to calculate the criteria weights and the Simple Additive Weighting (SAW) method for performing alternative ratings. The criteria used were 7, namely depth, pH, current speed, brightness, temperature, salinity, and dissolved oxygen, while alternative data were 11 points of seaweed cultivation locations on Nunukan Island. Based on the results of the implementation of the two methods, recommendations for two locations for seaweed cultivation are Sei Banjar I and Sei Banjar II with the same preference value of 0.937 which is the highest value compared to other alternatives.
References
Agustina, N. A., Wijaya, N. I., & Prasita, V. D. (2017). Kriteria Lahan Untuk Budidaya Rumput Laut (Eucheuma cottonii) Di Pulau Gili Genting, Madura. Seminar Nasional Kelautan XII, 109–116.
Bakir, B., & Hozairi, H. (2019). Penentuan Prioritas Lokasi Budidaya Rumput Laut di Kabupaten Sampang Menggunakan Metode TOPSIS. Jurnal Mnemonic, 1(1), 75–81. https://doi.org/10.36040/mnemonic.v1i1.25
Cahyapratama, A., & Sarno, R. (2018). Application of Analytic Hierarchy Process (AHP) and Simple Additive Weighting (SAW) methods in singer selection process. 2018 International Conference on Information and Communications Technology (ICOIACT), 234–239. https://doi.org/10.1109/ICOIACT.2018.8350707
Fachrial, A., Arifin, Z., & Khairina, D. M. (2017). Sistem Pendukung Keputusan Penentuan Lokasi Pembuangan Akhir Sampah Kota Samarinda Metode Simple Additive Weighting Berbasis Dekstop. Prosiding Seminar Ilmu Komputer Dan Teknologi Informasi, 2(1), 142–145.
Laurentinus, L., & Rinaldi, S. (2019). Implementasi Metode Analytical Hierarchy Process dan Simple Additive Weighting untuk Pemilihan Dosen Terbaik Studi Kasus STMIK Atma Luhur. Jurnal Teknologi Informasi Dan Ilmu Komputer, 6(6), 655. https://doi.org/10.25126/jtiik.2019661636
Moradi, S., Yousefi, H., Noorollahi, Y., & Rosso, D. (2020). Multi-criteria decision support system for wind farm site selection and sensitivity analysis: Case study of Alborz Province, Iran. Energy Strategy Reviews, 29(April 2017), 100478. https://doi.org/10.1016/j.esr.2020.100478
Naben, L., Letelay, K., & Pandie, E. S. Y. (2020). Sistem Pendukung Keputusan Penentuan Lokasi Lahan Pertanian untuk Budidaya Tanaman Jeruk Keprok Menggunakan Fuzzy Multi Atribute Decission Making (FMADM) dan Metode Simple Additive Weighting (SAW). Jurnal Komputer Dan Informatika, 8(2), 139–144. https://doi.org/10.35508/jicon.v8i2.2884
Noor, N. M. (2015). Analisis Kesesuaian Perairan Ketapang, Lampung Selatan Sebagai Lahan Budidaya Rumput Laut Kappapycus alvarezii. MASPARI JOURNAL, 7(2), 91–100. https://doi.org/10.36706/maspari.v7i2.2487
Pratama, O. (2020). Konservasi Perairan Sebagai Upaya menjaga Potensi Kelautan dan Perikanan Indonesia. Kementerian Kelautan Dan Perikanan. https://kkp.go.id/djprl/bpsplmakassar/artikel/19908-konservasi-perairan-sebagai-upaya-menjaga-potensi-kelautan-dan-perikanan-indonesia
Pratiwi, H. (2016). Buku Ajar Sistem Pendukung Keputusan (1st ed.). Deepublish.
Prihandoko, Nugraha, A. R., Alida, M., Pratama, M. N. Y., & Dewi, R. A. (2018). Analysis of Disease Data in Indonesia by Using SAW and AHP Decision Support Methods. 2018 Third International Conference on Informatics and Computing (ICIC), 1, 1–6. https://doi.org/10.1109/IAC.2018.8780438
Radiarta, N., Erlania, E., Haryadi, J., & Rosdiana, A. (2016). Analisis Pengembangan Budidaya Rumput Laut di Pulau Sebatik, Kabupaten Nunukan, Kalimantan Utara. Jurnal Kebijakan Perikanan Indonesia, 8(1), 29. https://doi.org/10.15578/jkpi.8.1.2016.29-40
Ramadiani, R., Ramadhani, B., Arifin, Z., Jundillah, M. L., & Azainil, A. (2020). Decision support system for determining chili land using weighted product method. Bulletin of Electrical Engineering and Informatics, 9(3), 1229–1237. https://doi.org/10.11591/eei.v9i3.2004
Saaty, T. L. (2008). Decision making with the analytic hierarchy process. International Journal of Services Sciences, 1(1), 83. https://doi.org/10.1504/IJSSCI.2008.017590
Saputra, M., Sitompul, O. S., & Sihombing, P. (2018). Comparison AHP and SAW to promotion of head major department SMK Muhammadiyah 04 Medan. Journal of Physics: Conference Series, 1007, 012034. https://doi.org/10.1088/1742-6596/1007/1/012034
Sari, N. K. A. P. (2021). Implementation of the AHP-SAW Method in the Decision Support System for Selecting the Best Tourism Village. Jurnal Teknik Informatika C.I.T Medicom, 13(1), 23–32. https://doi.org/10.35335/cit.Vol13.2021.51.pp23-32
Setiawan, E. B., Setiyadi, A., & Prakoso, W. A. (2020). Recommendation System for Determining Micro, Small and Medium Enterprise Business Locations. IJNMT (International Journal of New Media Technology), 7(2), 82–89. https://doi.org/10.31937/ijnmt.v7i2.1499
Singh, R. K., Chaudhary, N., & Saxena, N. (2018). Selection of warehouse location for a global supply chain: A case study. IIMB Management Review, 30(4), 343–356. https://doi.org/10.1016/j.iimb.2018.08.009
Sorongan, E., Sari, D. R., & Apriliza, P. (2021). Sistem Pendukung Keputusan Pemilihan Gudang Menggunakan Metode Single Page Application Dan Simple Additive Weighting. Jurnal Teknologi Informasi Dan Ilmu Komputer, 8(3), 485. https://doi.org/10.25126/jtiik.0813257
Teniwut, W. A., Marimin, M., & Djatna, T. (2019). GIS-Based multi-criteria decision making model for site selection of seaweed farming information centre: A lesson from small islands, Indonesia. Decision Science Letters, 8, 137–150. https://doi.org/10.5267/j.dsl.2018.8.001
Widians, J. A., Taruk, M., Fauziah, Y., & Setyadi, H. J. (2019). Decision Support System on Potential Land Palm Oil Cultivation using Promethee with Geographical Visualization. Journal of Physics: Conference Series, 1341(4), 042011. https://doi.org/10.1088/1742-6596/1341/4/042011
Yap, J. Y. L., Ho, C. C., & Ting, C. (2018). Analytic hierarchy process (AHP) for business site selection. Conference Paper in AIP Conference Proceedings, 020151. https://doi.org/10.1063/1.5055553
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Sri Rahayu, Hamdani Hamdani, Ramadiani Ramadiani
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with this journal agree to the following terms as stated in http://creativecommons.org/licenses/by-nc/4.0
a. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
b. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
c. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
